|
Post by hellman on Nov 5, 2011 21:51:11 GMT
hi, my minx has got drum brakes on front, i'm fitting a different engine and want to fit disc brakes. clutch master cylinder will be removed due to also fitting an auto box. so i can fit a servo/master cylinder. can the front drums, backing plates be removed leaving just the hubs? if so i can do my own conversion. anyone any info?
cheers chris.
|
|
|
Post by hellman on Nov 11, 2011 15:49:01 GMT
i'm going to use these and making bracket up to hold calipers.
|
|
|
Post by dodgealpine on Nov 11, 2011 20:15:27 GMT
I would have thought Alpine/Tiger /Rapier bits should fit - all having front discs.
|
|
|
Post by hellman on Nov 11, 2011 21:56:20 GMT
need a more modern set up, vented fronts. going auto box so room for decent servo and master cylinder, rear axle will be swapped for a volvo with discs.
|
|
huskytwo
Chrysler Avenger
1961 S2 Husky
Posts: 21
|
Post by huskytwo on Nov 14, 2011 22:59:11 GMT
Hellman Please tell use what disc and callipers you are using. are you going to use a differant hub or machine to fit discs, is PCD the same.
|
|
|
Post by hellman on Nov 15, 2011 18:04:28 GMT
hi, discs and calipers are sierra, pcd is the same, just slight maching needed on disc to sit flush on hub, brackets to be made to hold calipers on. going to an auto so new servo and mastercylinder going to be fitted.
|
|